Anhui Ruilong Glass Machinery Co., Ltd.
Email address : info@ahrlbljx.com
Phone : +8613063758190
Add:No.9 East of Shengli Road, Longzihu District
This production line is customized according to customer requirements. A total of 5 machines are composed. The composition of the machine is as follows: 1 SY-4028 double-turn single-station automatic loading machine. 2 SY-4028 automatic glass cutting machine. 3 Fully automatic horizontal breaking machine. 4 Fully automatic vertical breaking machine. 5 SY-800-2 washing machine;
Glass feed section-glass cleaning section-glass drying section-glass discharge section-assistant inspection section.
The automatic glass cutting machine is designed and manufactured according to the requirements of the buyer. The front and rear sections are connected to the glass chip taking manipulator, which is used to complete the automatic cutting and special-shaped process of cooktop panel glass.
This table is for glass transmission, the table size is customized according to customer's requirements.
The only patent for laminated glass cutting in China This machine is a new generation of full automatic laminated glass cutting machine developed by our company in recent years. It has the characteristics of simple operation, high adaptability and high cutting accuracy. A.Structure of machine Frame was made with international square steel tube and box iron by welding.The key position had been annealing treatment and gantry milling. So the frame has high stability and strength. Two-part construction to assemble the machine. The first part is the artificial auxiliary feeding and transmission part, equipped with automated positioning system. The second paragraph contains the upper and lower knife cutting system, the cutting film system, the heating system, and the auxiliary discharge system. B.Machine Parameters 1.Machine installation size: 6735 * 5640 * 1412mm (estimated) 2.Machine packing size: 11700 * 2260 * 1500mm (40ft container) 3.Weight: about 3000KG 4.Processing range of glass size:400*400mm --- 3700*2500mm 5.Processing range of glass thickness:3+X+3mm---8+X+8mm 6.Cutting speed: cutting 1-2 times in one minute 7.Heating time: Adjust by operator 8.Gantry cutter head moving speed: 0 --- 80 m / min. 9.Pressure of cutter and breaking: Pneumatic proportional valve control C. Machine configuration(Can specify configuration) 1.Motor: Delta SERVO MOTOR 2.Drive: Delta 3.Plc and touch screen: Delta 4.Electrical elements: CHINT 5.Program: Self-Design 6.Heating tube: China 7.Timing belts and wheels: China 8.Air cylinder and knife: Self-Design 9. Knife wheels: imported from Japan 10. Fan motor: China 11.Transmission shaft: China 12. Table Felt: imported 13. Proportional control valve: SMC from Japan 14. Machine frame: square tube welding 15. Sheet metal cover: plastic spray / paint D. Workflow description Man-machine interface HMI setting system parameters such as glass width, length, under knife pressure, etc.一一mechanical placement of glass into the synchronous belt area of the cutting table一一Automatic transmission and positioning of glass according to the cut size of input(There's a location system)一一Knife head at zero一一Pneumatic lower knife, upper and lower knife wheel cut(There's an automatic injection system)一一Cut and lift一一The upper press starts the press, and the lower surface glass breaks open一一Under the top rod up the glass, the upper surface of the glass break open一一Heat bar start heating一一The vacuum suction cup absorbs the glass on both sides of the tangent line and pulls the cutting seam apart一一Cutting film(PVB or EVA)一一The cutting action is complete and the entire artifact is transferred to the next segment tangent position(If you need to turn around and cut, you need to do it manually)一一Whole cutting is complete.一一Manually move the processed glass to the lower slide flip bracket with the air float assembly. E. Advantage 1.The whole machine is equipped with automatic positioning. The length and width dimensions that need to be processed can be manually set on the man-machine interface, which makes up for the shortcomings of inaccuracy and low production efficiency caused by previous generations of manual positioning. 2.Adopting full servo control, stable performance, guaranteed accuracy and doubled efficiency.
Item NO.:
SY-600Color:
Steel Blue or CustomizedLead Time:
25 daysWarranty:
1 YearSize Range:
30*30-580mmProcessing Range:
flat glass, thin glass
Structure configuration:
The national standard square tube skeleton; The cover is 1.5mm iron plate spray;
Cleaning section and drying section are stainless steel shell.
Four pairs of absorbent sponge rollers adopt imported pu material to withstand high temperature, long service life;
The drive part is controlled by variable frequency motor, and the cleaning speed can be adjusted arbitrarily.
Three pairs of brush (diameter of 0.15MM imported DuPont nylon silk, natural rubber roller to ensure cleaning effect.
The temperature controller can adjust the oven temperature.
The thin glass washing machine for dense drum driven design, processing area, circulating water cleaning glass once completed.
Can be customized according to the customer's cleaning requirements 1 section 2 or 3 sections of cleaning
Technical requirements:
Cleaning and drying of glass (0.5-5mm)
The effective cleaning width is 580mm
Basic parameters:
Glass size range:30×30 — 580mm
Heating rod 6kg, four fans 0.8kw
Continuously variable transmission: 0.75kw, 380v (stepless speed regulation)
Water pump: 0.25Kw, 380v
Gear motor: 0.75kw,380v
Weight: 600kgs
Dimension: 2000*1200*1000mm
Direction for use
SY- washing machine could wash and dry (0.5-5mm) flat glass, and the machine adopts horizontal structure, flat glass place on horizontal transfer roller, though feed section, cleaning section, water absorption section, dry section, to the discharge section.
The speed of glass transmission can be stepless speed regulation according to process requirements. Hot air temperature can also be set in advance.
Anhui Ruilong Glass Machinery Co., Ltd.
Email address : info@ahrlbljx.com
Phone : +8613063758190
Add:No.9 East of Shengli Road, Longzihu District
Copyright © Anhui Ruilong Glass Machinery Co., Ltd.