+8615655238712

info@ahrlbljx.com
banner
new products
  • Ruilong Automatic Laminated Glass Cutting Machine
    Automatic Laminated Glass Cutting Machine

      This machine is a new generation of full automatic laminated glass cutting machine developed by our company in recent years. It has the characteristics of simple operation, high adaptability and high cutting accuracy.  A.Structure of machine Frame was made with international square steel tube and box iron by welding.The key position had been annealing treatment and gantry milling. So the frame has high stability and strength. Two-part construction to assemble the machine. The first part is the artificial auxiliary feeding and transmission part, equipped with automated positioning system. The second paragraph contains the upper and lower knife cutting system, the cutting film system, the heating system, and the auxiliary discharge system.   B.Machine Parameters  1.Machine installation size: 6735 * 5640 * 1412mm (estimated) 2.Machine packing size: 11700 * 2260 * 1500mm (40ft container) 3.Weight: about 3000KG 4.Processing range of glass size:400*400mm --- 3700*2500mm 5.Processing range of glass thickness:3+X+3mm---8+X+8mm 6.Cutting speed: cutting 1-2 times in one minute 7.Heating time: Adjust by operator 8.Gantry cutter head moving speed: 0 --- 80 m / min. 9.Pressure of cutter and breaking: Pneumatic proportional valve control   C. Machine configuration(Can specify configuration)  1.Motor: Delta SERVO MOTOR 2.Drive: Delta 3.Plc and touch screen: Delta 4.Electrical elements: CHINT  5.Program: Self-Design 6.Heating tube: China 7.Timing belts and wheels: China 8.Air cylinder and knife: Self-Design 9. Knife wheels: imported from Japan 10. Fan motor: China 11.Transmission  shaft:  China 12. Table Felt: imported 13. Proportional control valve: SMC from Japan 14. Machine frame: square tube welding 15. Sheet metal cover: plastic spray / paint  D. Workflow description  Man-machine interface HMI setting system parameters such as glass width, length, under knife pressure, etc.一一mechanical placement of glass into the synchronous belt area of the cutting table一一Automatic transmission and positioning of glass according to the cut size of input(There's a location system)一一Knife head at zero一一Pneumatic lower knife, upper and lower knife wheel cut(There's an automatic injection system)一一Cut and lift一一The upper press starts the press, and the lower surface glass breaks open一一Under the top rod up the glass, the upper surface of the glass break open一一Heat bar start heating一一The vacuum suction cup absorbs the glass on both sides of the tangent line and pulls the cutting seam apart一一Cutting film(PVB or EVA)一一The cutting action is complete and the entire artifact is transferred to the next segment tangent position(If you need to turn around and cut, you need to do it manually)一一Whole cutting is complete.一一Manually move the processed glass to the lower slide flip bracket with the air float assembly.   E. Advantage 1.The whole machine is equipped with automatic positioning. The length and width dimensions that need to be processed can be manually set on the man-machine interface, which makes up for the shortcomings of inaccuracy and low production efficiency caused by previous generations of manual positioning. 2.Adopting full servo control, stable performance, guaranteed accuracy and doubled efficiency.

  • automatic glass cutting machine
    NC Glass Cutting Machine

    SY-8080 NC glass cutting machine could cut very small irregular glass. A popular machine for small factory and studio.

  • Ruilong CNC Glass Cutting Machine
    CNC Glass Cutting Machine

    CNC glass cutting machine consists of full automatic glass cutting machine, CNC glass loading machine, glass breaking machine.

  • ultra thin glass cutting machine
    Ultra thin Glass Cutting Machine

    This automatic ultra thin glass cutting machine is used for cutting ultra thin glass. Applicable to OLED glass, photoelectric glass, liquid crystal glass, display glass, mobile phone glass, touch screen glass, OGS process of ultra-thin glass cutting, high cutting efficiency, good accuracy, high yield, and easy to operate, the operator has no technical requirements.

  • Glass Edging Machine
    Glass Edging Line Four Side

    C shape glass grinding machine This machine consists of two set of straight line round shape edging machine (4 spindles/ 6pindles / 8spindles) 90 degree automatic steering table. Adopting PLC control system, Set the parameters to control the processing width and speed through the interface, High-precision double linear guide and double ball screw transmission structure and control system ensure the accuracy of the processing dimensions, It is suitable for the processing of thin glass within the thickness of 0.5~5mm. It has high milling speed and transfer efficiency.Suitable for the processing of thin glass with a thickness of 0.5~5mm, high processing speed and high transfer efficiency, suitable for deep processing of industrial glass, used with washing machines, screen printing lines, tempering lines, etc. Main structure The machine consists of bed, fixed grinding wheel group, moving grinding wheel group, lifting structure, circulating water cooling system, glass conveying structure, transverse opening and closing structure, inlet positioning structure and control system. The machine is treated by high temperature annealing after welding by bed, fixed grinding wheel group and moving grinding wheel group, and the internal stress is eliminated with aging treatment, the working time is not deformed, and the quality of the processed glass is guaranteed to be stable. The upper beam adopts the integral lifting structure, which is advantageous to replace the grinding wheel conveniently. Technical parameter Max. Glass size 1000mm (could do customized) Min. Glass size 100mm (also could do 55mm need customized) Grinding glass thickness 0.5-19mm Speed: 0.67-10m/min Power: 13.7kw Voltage: 380V/50hz Parallelism ≤0.20mm/m Diagonal ≤0.40mm/m Weight: 3500kgs Dimension:  2420*2510*1650mm Equipment configuration Spindle motor: Xindongya Guangzhou Transmission, switch on and off, lift motor: Shanghai Ruijin Wire Rod: TBI taiwan Guide rail: HIWIN taiwan Transmission optical shaft: Wuxi chrome plated hard shaft Other electrical devices: circuit breaker (Zhengtai); encoder (Omron); AC contactor (Siyan Technology) Synchronous wheel: imported 2A12 aluminum alloy Synchronous belt: Italian Babel seamless steel wire belt Grinding wheel: domestic high-quality diamond wheel and Italy imported resin wheel. Transfer wheel: PU rubber wheel

CNC Glass Cutting Machine

CNC glass cutting machine consists of full automatic glass cutting machine, CNC glass loading machine, glass breaking machine.
  • Item NO.:

    SY-2621
  • Color:

    Steel Blue or Customized
  • Lead Time:

    20 days
  • Warranty:

    1 Year
  • Size Range:

    10*10-2440*1830mm
  • Processing Range:

    Float glass, irregular cutting
Product Details



SY-2621 Single side single station glass loading machine (The Machine could be customized according to customer's requirements. )


Equipment composition    

Equipment main frame / equipment walking system / equipment transmission system / vacuum suction system / mechanical overturn system


Mechanical configuration:

1). flip sprocket chain: special high-precision enhanced shape.

2). transmission wheel: imported PU material

3). vacuum cups: NBR material inlet (double suction structure)

4). transmission / flip motor: Taiwan Bang Chung motor

5). vacuum pump: China-Germany joint venture


Electrical components

1). PLC controller: Panasonic Japan

2). Frequency converter: Delta

3). Photoelectric switch:SONON

4). Control cable: flexible shielded cable.

5). Control electric Lam: Zhejiang Yongqing pneumatic.

6). Contactor: China Siyan Technology.

7). Positive and negative pressure sensor: Japan SMC

8). Pneumatic components: main original adopt Taiwan AIRTAC

9). Approach switch: Imported



Technical parameters

1). The loading glass size scope: Min.: 1500*1200mm

                                              Max.: 2500*2000mm

2). Loading thickness: 2~25mm

3). Loading speed: 40-60s/pc(adjustable)

4). Transmission speed:0~40m/min(adjustable)

5). Maximum suction depth: 700mm

6). Largest loading glass weight: 900KG

7). Arms quantity: 3 arms

8). Suckers quantity in one arm: 3 suckers.

9). Arm flip: single.

10). Flip station: Single

11). Voltage: 380V/50HZ(Could do customized)

12). Power: 4.3KW

13). Compressed air: 0.2-0.4Mpa

14). vacuum pressure: -70~ 90Kpa(adjustable according to glass thickness)

15). X axis walking speed 25m/min (adjustable)

       Y axis walking speed 5m/min (adjustable)


Machine overview

1). Full-auto glass loading machine is machine takes one piece of glass from racks, flip to horizontal countertop, which can be transported glass to next processing machine(Such as glass cutting machine.

2). Vacuum system uses well-known brand of vacuum pump, greatly improving the safety and stability of the whole system; the mainframe driven by the motor in the dual-track movement, the main frame arm with sucker arm, each arm has three suckers Tune. When the suction cup touches the original piece glass on the glass frame, the vacuum pump starts to work, the sucker produces a vacuum to suck the glass, and when the vacuum reaches the set value, the flip arm is lifted and turned to Horizontal position, exhaust, the glass will be transported to the X-axis end and positioning, waiting to convey to the cutting machine. The entire operation process is controlled by PLC.


Technical Description

1). Flip mode: mechanical flip, running fast (fastest speed is 50s/pc), stable operation, without any litter, to meet the 3 ~ 25mm glass on the film. Assembly double-track flip chain protection, to ensure that the flip process safe and reliable

2). Flip angle: 95 ~ 110 degrees adjustable. Can meet a variety of angles on the glass frame.

3). Suction depth: a special connecting rod telescopic mechanism, sucker can be extended by 300mm, to meet the depth of 700mm on the film, without any auxiliary frame, can be directly from the iron frame on the film operations.

4). Induction device: the use of two sets of glass photoelectric sensor (a set, a set of spare), can effectively eliminate the failure caused by induction failure. Equipment operation more secure stable and reliable.

5). Lifting device: Unique connecting rod lifting device, to ensure that the lifting action synchronized, put an end to the lifting of the steps are not synchronized defects. Can guarantee the safety of glass fragments.

6). Adsorption device: Sucker adopts advanced double-layer adsorption structure (inside and outside the two layers), suction film is more solid, put an end to the suction cup outer layer of the leakage caused by leakage.

7). Suction cup control: each sucker has a separate valve for switching control, free to choose the number of suction cups to facilitate the operation of various sizes of glass on the demand.

8). Lifting the protection of the film: a unique device to take the film lifting protection device, which can effectively prevent the glass is not timely due to the film caused by the glass associated with glass damage caused by the phenomenon.

9). Alarm device: with automatic detection and traffic lights alarm device, the abnormal situation can automatically alarm and display. With emergency stop switch, can be in the event of abnormal control.

10). Operating mode: The device has two modes: automatic mode and manual mode. Easy to operate intuitive

11). the user interface: the use of color LCD touch screen display interface, Chinese and English display module, easy to operate.

12). parameter setting: the order of the film and the number of pieces per station can be digitized automatically set, with the cutting machine automatically connected machine, automatic machine walking, automatic film, to achieve continuous continuous film, without repeated operation , More convenient and quick.



SY-2621 Full-auto glass cutting machine


Equipment specifications


Max.cutting glass size: 2500*2000mm

Work bench height: 910±20mm.

Machine weight: 2.5T.

Cutting thickness: 3~25mm


Cutting parameters

Straight line parallelism: ≤±0.15mm/m    

Diagonal accuracy: ≤±0.35mm/m(The above precision is subject to the cutting line accuracy)

Cutter beam speed: 0~160m/min.(adjustable)

Cutter beam acceleration≥3.0m/s²

Cutter holder speed ≥180m/min

Cutter holder acceleration ≥6.0m/s²

The Speed of the conveyor belt ≥40m/min

Cutting head positioning accuracy error ≤±0.15 mm



Voltage Power

Installed Power requirements: 380V/50HZ

The actual power of the equipment: 8KW

Compressed air: 0.6MPA


Equipment performance

Equipment frame: equipment after aging treatment to ensure that the table is not deformed, as well as the accuracy of parallelism.

Cutting knife seat: the knife can be rotated 360 degrees, up and down cutting (can accurately cut any straight line and a variety of shaped glass)

Table: the use of imported high-density waterproof panel. Can be effective moisture.

Felt: imported industrial felt (fiber and wool composition) is smooth, and anti-static, reduce glass scratches.

Positioning system: pneumatic mechanical and photoelectric scanning positioning.

Oil supply: pneumatic automatic filling, and the next knife synchronization. Double oil control, can be used simultaneously kerosene and cutting oil.

Conveyor: Automatic belt conveyor.


Machine Part

Platen: the use of waterproof board. (Flatness ≤ ± 0.20mm / m).

Rack: Japan KHK.

Drive belt / pulley: Italy

Wheel / wheel clip: Germany Boller.




Electrical parts

Use of industrial IPC directly to control, Microsoft Windows interface.

Voltage:380V/50HZ. Equipment with transformer device.

Motor:Japan Yaskawa servo motor.

Proximity switch : Omron

Control card: US imports, Galil

Main electrical components: Zhengtai or Great wall

Pneumatic proportional valve: Japan SMC








SY-2621 Air floation breaking table


Technical parameters


Table size: 2500×2000mm


Workbench height: 910±10mm(customized ok)


Fan motor: 1set(independent switch control).




Main configuration


Table cover: black fiber felt.


Table board: High density fiber board


Ejector rod: crosswise one piece, lengthways one piece.

Send a message

You can contact us any way that is convenient for you. We are available 24/7 via fax, email or telephone.

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Product Contact us

Anhui Ruilong Glass Machinery Co., Ltd.


Email address : info@ahrlbljx.com


Phone : +8615655238712


Add:No.6 East of Shengli Road, Longzihu District

Copyright © Anhui Ruilong Glass Machinery Co., Ltd.

 

Leave a Message

Leave a Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

home

products

company

contact