+8615655238712

info@ahrlbljx.com
banner
new products
  • Round Glass Grinding Machine
    Instrument Glass Cover Grinding Machine

    This equipment is a non-standard customized equipment. The main customer group is instrument glass, which is used for the chamfering process of round glass.。

  •  Glass-ceramic Cutting Machine
    Glass-ceramic Cutting Machine SY-6050

    The automatic glass cutting machine is designed and manufactured according to the requirements of the buyer. The front and rear sections are connected to the glass chip taking manipulator, which is used to complete the automatic cutting and special-shaped process of cooktop panel glass.

  • Glass transfer table
    Glass Transfer Table

    This table is for glass transmission, the table size is customized according to customer's requirements. 

  • Ruilong Automatic Laminated Glass Cutting Machine
    Automatic Laminated Glass Cutting Machine

      This machine is a new generation of full automatic laminated glass cutting machine developed by our company in recent years. It has the characteristics of simple operation, high adaptability and high cutting accuracy.  A.Structure of machine Frame was made with international square steel tube and box iron by welding.The key position had been annealing treatment and gantry milling. So the frame has high stability and strength. Two-part construction to assemble the machine. The first part is the artificial auxiliary feeding and transmission part, equipped with automated positioning system. The second paragraph contains the upper and lower knife cutting system, the cutting film system, the heating system, and the auxiliary discharge system.   B.Machine Parameters  1.Machine installation size: 6735 * 5640 * 1412mm (estimated) 2.Machine packing size: 11700 * 2260 * 1500mm (40ft container) 3.Weight: about 3000KG 4.Processing range of glass size:400*400mm --- 3700*2500mm 5.Processing range of glass thickness:3+X+3mm---8+X+8mm 6.Cutting speed: cutting 1-2 times in one minute 7.Heating time: Adjust by operator 8.Gantry cutter head moving speed: 0 --- 80 m / min. 9.Pressure of cutter and breaking: Pneumatic proportional valve control   C. Machine configuration(Can specify configuration)  1.Motor: Delta SERVO MOTOR 2.Drive: Delta 3.Plc and touch screen: Delta 4.Electrical elements: CHINT  5.Program: Self-Design 6.Heating tube: China 7.Timing belts and wheels: China 8.Air cylinder and knife: Self-Design 9. Knife wheels: imported from Japan 10. Fan motor: China 11.Transmission  shaft:  China 12. Table Felt: imported 13. Proportional control valve: SMC from Japan 14. Machine frame: square tube welding 15. Sheet metal cover: plastic spray / paint  D. Workflow description  Man-machine interface HMI setting system parameters such as glass width, length, under knife pressure, etc.一一mechanical placement of glass into the synchronous belt area of the cutting table一一Automatic transmission and positioning of glass according to the cut size of input(There's a location system)一一Knife head at zero一一Pneumatic lower knife, upper and lower knife wheel cut(There's an automatic injection system)一一Cut and lift一一The upper press starts the press, and the lower surface glass breaks open一一Under the top rod up the glass, the upper surface of the glass break open一一Heat bar start heating一一The vacuum suction cup absorbs the glass on both sides of the tangent line and pulls the cutting seam apart一一Cutting film(PVB or EVA)一一The cutting action is complete and the entire artifact is transferred to the next segment tangent position(If you need to turn around and cut, you need to do it manually)一一Whole cutting is complete.一一Manually move the processed glass to the lower slide flip bracket with the air float assembly.   E. Advantage 1.The whole machine is equipped with automatic positioning. The length and width dimensions that need to be processed can be manually set on the man-machine interface, which makes up for the shortcomings of inaccuracy and low production efficiency caused by previous generations of manual positioning. 2.Adopting full servo control, stable performance, guaranteed accuracy and doubled efficiency.

  • Ruilong Automatic glass breaking line
    Automatic glass breaking line

    The entire automated assembly line is fully automatic for the glass plate with a plate width of 1830 * 1220mm, a processed size of 454 * 404mm, and a thickness of 1.5-10mm --- cutting --- --- breaking --- delivery to the customer Own next equipment (height 900mm), realize unattended operation, and meet the production cycle of small pieces of glass to ≤12S / piece.

Single Side Glass Grinding Machine

Single side glass grinding machine specifically for cabinet door, diamond door glass.


  • Item NO.:

    SY-1000-4
  • Color:

    Steel Blue or Customized
  • Lead Time:

    20 days
  • Warranty:

    1 Year
  • Size Range:

    50*50-1500*1000mm
  • Processing Range:

    cabinet door, diamond door glass
Product Details


Compared with the conventional edge grinder, the processing size is obviously reduced. The minimum j machining size can reach 50mm. For more than 2mm glass can be processed. Exceeding the limit of the traditional edge grinding machine on the market can only process 3mm or more glass. At the same time, this machine can realize the accuracy of parallelism and diagonal accuracy of the processed products. It is the best choice for King Kong door panels, cabinet doors and windows, optics, electronics, glass crafts, glass and other processing industries.


SY-1000-4 horizontal glass straight line edging machine in order to market needs, designed and manufactured in accordance with the principles of bilateral high precision milling machine glass straight line edging machine one of the products. Suitable for grinding the straight edges and corners of flat glass of different sizes and thicknesses, straight edge fine grinding, upper corner chamfering, fine grinding, polishing one time processing, grinding wheel number: total 4 grinding heads, single The sides are arranged in sequence as one resin wheel, one chamfer resin wheel, and two polishing wheels. The 45-degree-high bevel edge grinding on the upper chamfer can be realized, and the polishing is completed once; the bottom edge is ground. The use of mechanical stepless speed regulation, adjustable range, stable speed, can change the feed speed during the grinding process, synchronous belt clamping and transmission of glass thickness 2-12mm for grinding.


Technical Parameter

Glass size (Max: 1500 x 1000) (larger size can be customized)

Glass size (minimum: 50 x 50)

Glass thickness: 2-12

Feeding speed: 0.5m/min-8m/min

Weight: 1800kg

Dimension: 2200*1200*1650mm(L × W × H)

Power: 6KW

Table height: 750mm

Voltage: 380V / 50HZ

Maximum angular grinding quantity: 2 ~ 6mm

Straight edge maximum grinding quantity: 2

Angular angle: 45 degree

Machining accuracy: positive or negative 20s


Anhui Ruilong Glass Machinery Co., Ltd. is a senior enterprise specializing in the production of glass edge grinder machine and other glass machinery.Our company has advanced production technology and mature business model, and is your reliable partner.


Send a message

You can contact us any way that is convenient for you. We are available 24/7 via fax, email or telephone.

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Product Contact us

Anhui Ruilong Glass Machinery Co., Ltd.


Email address : info@ahrlbljx.com


Phone : +8615655238712


Add:No.6 East of Shengli Road, Longzihu District

Copyright © Anhui Ruilong Glass Machinery Co., Ltd.

 

Leave a Message

Leave a Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

home

products

company

contact