Anhui Ruilong Glass Machinery Co., Ltd.
Email address : info@ahrlbljx.com
Phone : +8613063758190
Add:No.9 East of Shengli Road, Longzihu District
This production line is customized according to customer requirements. A total of 5 machines are composed. The composition of the machine is as follows: 1 SY-4028 double-turn single-station automatic loading machine. 2 SY-4028 automatic glass cutting machine. 3 Fully automatic horizontal breaking machine. 4 Fully automatic vertical breaking machine. 5 SY-800-2 washing machine;
Glass feed section-glass cleaning section-glass drying section-glass discharge section-assistant inspection section.
The automatic glass cutting machine is designed and manufactured according to the requirements of the buyer. The front and rear sections are connected to the glass chip taking manipulator, which is used to complete the automatic cutting and special-shaped process of cooktop panel glass.
This table is for glass transmission, the table size is customized according to customer's requirements.
The only patent for laminated glass cutting in China This machine is a new generation of full automatic laminated glass cutting machine developed by our company in recent years. It has the characteristics of simple operation, high adaptability and high cutting accuracy. A.Structure of machine Frame was made with international square steel tube and box iron by welding.The key position had been annealing treatment and gantry milling. So the frame has high stability and strength. Two-part construction to assemble the machine. The first part is the artificial auxiliary feeding and transmission part, equipped with automated positioning system. The second paragraph contains the upper and lower knife cutting system, the cutting film system, the heating system, and the auxiliary discharge system. B.Machine Parameters 1.Machine installation size: 6735 * 5640 * 1412mm (estimated) 2.Machine packing size: 11700 * 2260 * 1500mm (40ft container) 3.Weight: about 3000KG 4.Processing range of glass size:400*400mm --- 3700*2500mm 5.Processing range of glass thickness:3+X+3mm---8+X+8mm 6.Cutting speed: cutting 1-2 times in one minute 7.Heating time: Adjust by operator 8.Gantry cutter head moving speed: 0 --- 80 m / min. 9.Pressure of cutter and breaking: Pneumatic proportional valve control C. Machine configuration(Can specify configuration) 1.Motor: Delta SERVO MOTOR 2.Drive: Delta 3.Plc and touch screen: Delta 4.Electrical elements: CHINT 5.Program: Self-Design 6.Heating tube: China 7.Timing belts and wheels: China 8.Air cylinder and knife: Self-Design 9. Knife wheels: imported from Japan 10. Fan motor: China 11.Transmission shaft: China 12. Table Felt: imported 13. Proportional control valve: SMC from Japan 14. Machine frame: square tube welding 15. Sheet metal cover: plastic spray / paint D. Workflow description Man-machine interface HMI setting system parameters such as glass width, length, under knife pressure, etc.一一mechanical placement of glass into the synchronous belt area of the cutting table一一Automatic transmission and positioning of glass according to the cut size of input(There's a location system)一一Knife head at zero一一Pneumatic lower knife, upper and lower knife wheel cut(There's an automatic injection system)一一Cut and lift一一The upper press starts the press, and the lower surface glass breaks open一一Under the top rod up the glass, the upper surface of the glass break open一一Heat bar start heating一一The vacuum suction cup absorbs the glass on both sides of the tangent line and pulls the cutting seam apart一一Cutting film(PVB or EVA)一一The cutting action is complete and the entire artifact is transferred to the next segment tangent position(If you need to turn around and cut, you need to do it manually)一一Whole cutting is complete.一一Manually move the processed glass to the lower slide flip bracket with the air float assembly. E. Advantage 1.The whole machine is equipped with automatic positioning. The length and width dimensions that need to be processed can be manually set on the man-machine interface, which makes up for the shortcomings of inaccuracy and low production efficiency caused by previous generations of manual positioning. 2.Adopting full servo control, stable performance, guaranteed accuracy and doubled efficiency.
Item NO.:
SY-1000-4Color:
Steel Blue or CustomizedLead Time:
25 daysWarranty:
1 YearSize Range:
100*100- 1000*1000mmProcessing Range:
Float glass
This machine consists of two set of straight line round shape edging machine (4 spindles/ 6pindles / 8spindles) 90 degree automatic steering table. Adopting PLC control system, Set the parameters to control the processing width and speed through the interface, High-precision double linear guide and double ball screw transmission structure and control system ensure the accuracy of the processing dimensions, It is suitable for the processing of thin glass within the thickness of 0.5~5mm. It has high milling speed and transfer efficiency.Suitable for the processing of thin glass with a thickness of 0.5~5mm, high processing speed and high transfer efficiency, suitable for deep processing of industrial glass, used with washing machines, screen printing lines, tempering lines, etc.
A. Main structure
The machine consists of bed, fixed grinding wheel group, moving grinding wheel group, lifting structure, circulating water cooling system, glass conveying structure, transverse opening and closing structure, inlet positioning structure and control system.
The machine is treated by high temperature annealing after welding by bed, fixed grinding wheel group and moving grinding wheel group, and the internal stress is eliminated with aging treatment, the working time is not deformed, and the quality of the processed glass is guaranteed to be stable. The upper beam adopts the integral lifting structure, which is advantageous to replace the grinding wheel conveniently.
B. Technical parameter
Max. Glass size 1000mm (could do customized)
Min. Glass size 100mm (also could do 55mm need customized)
Grinding glass thickness 0.5-19mm
Speed: 0.67-10m/min
Power: 13.7kw
Voltage: 380V/50hz
Parallelism ≤0.20mm/m
Diagonal ≤0.40mm/m
Weight: 3500kgs
Dimension: 2420*2510*1650mm
C. Equipment configuration
Spindle motor: Xindongya Guangzhou
Transmission, switch on and off, lift motor: Shanghai Ruijin
Wire Rod: TBI taiwan
Guide rail: HIWIN taiwan
Transmission optical shaft: Wuxi chrome plated hard shaft
Other electrical devices: circuit breaker (Zhengtai); encoder (Omron); AC contactor (Siyan Technology)
Synchronous wheel: imported 2A12 aluminum alloy
Synchronous belt: Italian Babel seamless steel wire belt
Grinding wheel: domestic high-quality diamond wheel and Italy imported resin wheel.
Transfer wheel: PU rubber wheel
Anhui Ruilong Glass Machinery Co., Ltd.
Email address : info@ahrlbljx.com
Phone : +8613063758190
Add:No.9 East of Shengli Road, Longzihu District
Copyright © Anhui Ruilong Glass Machinery Co., Ltd.