new products
  • Round Glass Grinding Machine
    Instrument Glass Cover Grinding Machine

    This equipment is a non-standard customized equipment. The main customer group is instrument glass, which is used for the chamfering process of round glass.。

  •  Glass-ceramic Cutting Machine
    Glass-ceramic Cutting Machine SY-6050

    The automatic glass cutting machine is designed and manufactured according to the requirements of the buyer. The front and rear sections are connected to the glass chip taking manipulator, which is used to complete the automatic cutting and special-shaped process of cooktop panel glass.

  • Glass transfer table
    Glass Transfer Table

    This table is for glass transmission, the table size is customized according to customer's requirements. 

  • Ruilong Automatic Laminated Glass Cutting Machine
    Automatic Laminated Glass Cutting Machine

      This machine is a new generation of full automatic laminated glass cutting machine developed by our company in recent years. It has the characteristics of simple operation, high adaptability and high cutting accuracy.  A.Structure of machine Frame was made with international square steel tube and box iron by welding.The key position had been annealing treatment and gantry milling. So the frame has high stability and strength. Two-part construction to assemble the machine. The first part is the artificial auxiliary feeding and transmission part, equipped with automated positioning system. The second paragraph contains the upper and lower knife cutting system, the cutting film system, the heating system, and the auxiliary discharge system.   B.Machine Parameters  1.Machine installation size: 6735 * 5640 * 1412mm (estimated) 2.Machine packing size: 11700 * 2260 * 1500mm (40ft container) 3.Weight: about 3000KG 4.Processing range of glass size:400*400mm --- 3700*2500mm 5.Processing range of glass thickness:3+X+3mm---8+X+8mm 6.Cutting speed: cutting 1-2 times in one minute 7.Heating time: Adjust by operator 8.Gantry cutter head moving speed: 0 --- 80 m / min. 9.Pressure of cutter and breaking: Pneumatic proportional valve control   C. Machine configuration(Can specify configuration)  1.Motor: Delta SERVO MOTOR 2.Drive: Delta 3.Plc and touch screen: Delta 4.Electrical elements: CHINT  5.Program: Self-Design 6.Heating tube: China 7.Timing belts and wheels: China 8.Air cylinder and knife: Self-Design 9. Knife wheels: imported from Japan 10. Fan motor: China 11.Transmission  shaft:  China 12. Table Felt: imported 13. Proportional control valve: SMC from Japan 14. Machine frame: square tube welding 15. Sheet metal cover: plastic spray / paint  D. Workflow description  Man-machine interface HMI setting system parameters such as glass width, length, under knife pressure, etc.一一mechanical placement of glass into the synchronous belt area of the cutting table一一Automatic transmission and positioning of glass according to the cut size of input(There's a location system)一一Knife head at zero一一Pneumatic lower knife, upper and lower knife wheel cut(There's an automatic injection system)一一Cut and lift一一The upper press starts the press, and the lower surface glass breaks open一一Under the top rod up the glass, the upper surface of the glass break open一一Heat bar start heating一一The vacuum suction cup absorbs the glass on both sides of the tangent line and pulls the cutting seam apart一一Cutting film(PVB or EVA)一一The cutting action is complete and the entire artifact is transferred to the next segment tangent position(If you need to turn around and cut, you need to do it manually)一一Whole cutting is complete.一一Manually move the processed glass to the lower slide flip bracket with the air float assembly.   E. Advantage 1.The whole machine is equipped with automatic positioning. The length and width dimensions that need to be processed can be manually set on the man-machine interface, which makes up for the shortcomings of inaccuracy and low production efficiency caused by previous generations of manual positioning. 2.Adopting full servo control, stable performance, guaranteed accuracy and doubled efficiency.

  • Ruilong Automatic glass breaking line
    Automatic glass breaking line

    The entire automated assembly line is fully automatic for the glass plate with a plate width of 1830 * 1220mm, a processed size of 454 * 404mm, and a thickness of 1.5-10mm --- cutting --- --- breaking --- delivery to the customer Own next equipment (height 900mm), realize unattended operation, and meet the production cycle of small pieces of glass to ≤12S / piece.

Straight Line Grinding Machine (Horizontal)

SY- 2000-9 straight line glass grinding machine can process glass, stone, perspex glass, acrylic plate, etc.

  • Item NO.:

  • Color:

    Steel Blue or Customized
  • Lead Time:

    25 days
  • Warranty:

    1 Year
  • Size Range:

  • Processing Range:

    glass, stone, perspex glass, acrylic plate
Product Details

SY- 2000-9 Machine can process glass, stone, perspex glass, acrylic plate, etc. and the processing size of the conventional edge grinding machine is obviously reduced , and the minimum value can reach 50 mm . For the thickness of 1mm glass can be processed, beyond the market conventional edging machine can only process 3mm above the glass limit. At the same time, the machine can achieve the accuracy of parallelism and diagonal.

SY-2000-9 is the best choice for optics, electronics, glass crafts, window glass and so on.

Brife Introduction

SR-2000-9 horizontal glass linear edging machine is one of the series of high precision glass linear edging machines designed and manufactured according to the principle of bilateral edge grinder for the purpose of market demand. It is suitable for grinding straight edges and edges of flat glass of different sizes and thickness, rough grinding of straight edges, finishing grinding, polishing, rough grinding of edges and angles on both sides.Using mechanical stepless speed regulation, adjustable range, stable speed change, can change the feed speed in the grinding process, synchronous belt clamping and transmission thickness 2-19mm glass grinding, The diamond grinding wheel is coarse and sharp, the precision is high with 10S40 grinding wheel, the surface is polished with wool felt wheel and cerium oxide polishing agent, the surface of the ground glass can reach the mirror surface finish and the polishing brightness of SY-2000 -9 is even better.

Technical Parameter

Dimension 2500*2000*1800mm (L*W*H)

Workbench height: 800mm

Weight: 1500kgs

Voltage: 380V/50HZ

Power: 15kw

Feeding speed: 0.5-9m/min (stepless adjustable)

Processing scope

Straight line max. Grinding depth: 3mm

Angular max. Grinding width 2.5mm

Angular angle: 45°

Glass size: Max. 2000*2000mm, min. 50*50mm (larger size could do customized)

Glass thickness: 2-19mm

Processing accuracy: Prallelism ±0.3mm , Diagonal ±0.5mm

Spindle quantity: 9 pcs (Straight line 4 or 5 pcs, upper chamfering 2 or 3 pcs, under chamfering 2 pcs. Or customized )

Anhui Ruilong Glass Machinery Co., Ltd. is a high-level enterprise specializing in the production of single side glass grinding machine.  The company integrates scientific research, new product development, production, sales and technical services. We have strong strength and are trustworthy!

Send a message

You can contact us any way that is convenient for you. We are available 24/7 via fax, email or telephone.

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Product Contact us

Anhui Ruilong Glass Machinery Co., Ltd.

Email address : info@ahrlbljx.com

Phone : +8615655238712

Add:No.6 East of Shengli Road, Longzihu District

Copyright © Anhui Ruilong Glass Machinery Co., Ltd.


Leave a Message

Leave a Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!