+8615655238712

info@ahrlbljx.com
banner
new products
  • Round Glass Grinding Machine
    Instrument Glass Cover Grinding Machine

    This equipment is a non-standard customized equipment. The main customer group is instrument glass, which is used for the chamfering process of round glass.。

  •  Glass-ceramic Cutting Machine
    Glass-ceramic Cutting Machine SY-6050

    The automatic glass cutting machine is designed and manufactured according to the requirements of the buyer. The front and rear sections are connected to the glass chip taking manipulator, which is used to complete the automatic cutting and special-shaped process of cooktop panel glass.

  • Glass transfer table
    Glass Transfer Table

    This table is for glass transmission, the table size is customized according to customer's requirements. 

  • Ruilong Automatic Laminated Glass Cutting Machine
    Automatic Laminated Glass Cutting Machine

      This machine is a new generation of full automatic laminated glass cutting machine developed by our company in recent years. It has the characteristics of simple operation, high adaptability and high cutting accuracy.  A.Structure of machine Frame was made with international square steel tube and box iron by welding.The key position had been annealing treatment and gantry milling. So the frame has high stability and strength. Two-part construction to assemble the machine. The first part is the artificial auxiliary feeding and transmission part, equipped with automated positioning system. The second paragraph contains the upper and lower knife cutting system, the cutting film system, the heating system, and the auxiliary discharge system.   B.Machine Parameters  1.Machine installation size: 6735 * 5640 * 1412mm (estimated) 2.Machine packing size: 11700 * 2260 * 1500mm (40ft container) 3.Weight: about 3000KG 4.Processing range of glass size:400*400mm --- 3700*2500mm 5.Processing range of glass thickness:3+X+3mm---8+X+8mm 6.Cutting speed: cutting 1-2 times in one minute 7.Heating time: Adjust by operator 8.Gantry cutter head moving speed: 0 --- 80 m / min. 9.Pressure of cutter and breaking: Pneumatic proportional valve control   C. Machine configuration(Can specify configuration)  1.Motor: Delta SERVO MOTOR 2.Drive: Delta 3.Plc and touch screen: Delta 4.Electrical elements: CHINT  5.Program: Self-Design 6.Heating tube: China 7.Timing belts and wheels: China 8.Air cylinder and knife: Self-Design 9. Knife wheels: imported from Japan 10. Fan motor: China 11.Transmission  shaft:  China 12. Table Felt: imported 13. Proportional control valve: SMC from Japan 14. Machine frame: square tube welding 15. Sheet metal cover: plastic spray / paint  D. Workflow description  Man-machine interface HMI setting system parameters such as glass width, length, under knife pressure, etc.一一mechanical placement of glass into the synchronous belt area of the cutting table一一Automatic transmission and positioning of glass according to the cut size of input(There's a location system)一一Knife head at zero一一Pneumatic lower knife, upper and lower knife wheel cut(There's an automatic injection system)一一Cut and lift一一The upper press starts the press, and the lower surface glass breaks open一一Under the top rod up the glass, the upper surface of the glass break open一一Heat bar start heating一一The vacuum suction cup absorbs the glass on both sides of the tangent line and pulls the cutting seam apart一一Cutting film(PVB or EVA)一一The cutting action is complete and the entire artifact is transferred to the next segment tangent position(If you need to turn around and cut, you need to do it manually)一一Whole cutting is complete.一一Manually move the processed glass to the lower slide flip bracket with the air float assembly.   E. Advantage 1.The whole machine is equipped with automatic positioning. The length and width dimensions that need to be processed can be manually set on the man-machine interface, which makes up for the shortcomings of inaccuracy and low production efficiency caused by previous generations of manual positioning. 2.Adopting full servo control, stable performance, guaranteed accuracy and doubled efficiency.

  • Ruilong Automatic glass breaking line
    Automatic glass breaking line

    The entire automated assembly line is fully automatic for the glass plate with a plate width of 1830 * 1220mm, a processed size of 454 * 404mm, and a thickness of 1.5-10mm --- cutting --- --- breaking --- delivery to the customer Own next equipment (height 900mm), realize unattended operation, and meet the production cycle of small pieces of glass to ≤12S / piece.

Low-E Glass Washing Machine

SY-2500 glass washing machine could wash flat low-e glass
  • Item NO.:

    SY-2500
  • Color:

    Steel Blue or Customized
  • Lead Time:

    25 days
  • Warranty:

    1 Year
  • Size Range:

    400*400-2500*3500
  • Processing Range:

    flat glass, low-e glass
Product Details



The feeding section is composed of 10 rubber rolls and 1 set of high pressure spray pre washing parts.

The cleaning and drying section can be integrally lifted, it consists of 21 cots, 2 sets of lifting hard brushes, 1 set of soft brushes, 2 sets of high pressure air knives, and 3 sets of high pressure spray.

There are one set 22KW high pressure fans, 3 sets high pressure water pump, 2 set brush motor, 1 set cleaning section of lifting motor, 1 set rubber roller drive motor, bevel gear drive.

Machine size length 5800mm, width 3300mm, height 2700mm. Rubber roll diameter is 75mm. Loading section rubber roll center distance is 175mm. The main machine frame is made of 80*60*3mm square pipe, rubber roll bearing is fixed on aluminum alloy square tube material, make sure the rollers are on flat surface.


Machine description:

1.SY-2500 washing machine adopts a horizontal structure, and the feeding place with stainless steel water tank and a high precision water spray, so that the rubber roll can realize automatic cleaning function and improve the clean effect.

2.The transmission adopts gear drive, frequency conversion speed regulation, digital display, easy operation, and it is beneficial to connect the production line.

3.Washing section and drying section can up and down integrally, the largest up height is 400mm, easy to clean and are inside rubber rollers.

4.Use 3 pairs brushes, the front of two scrub brush moved by cylinder, the third soft brush can brush Low-E glass.

5.Air drying section use profession design two pairs wind knife, big wind with good effect.

6.All machine use stainless steel material.


Main Parameter:                      

Model:SY-2500                    

Washing Speed:1.5-8m/min

Max. Washing size :2500*3500mm

Min. Washing size :400x400mm

Glass thickness :2-25mm

Full machine Power:27kw

Machine Size :5800x3300x2700mm

Machine Weight:3000kg


Send a message

You can contact us any way that is convenient for you. We are available 24/7 via fax, email or telephone.

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Product Contact us

Anhui Ruilong Glass Machinery Co., Ltd.


Email address : info@ahrlbljx.com


Phone : +8615655238712


Add:No.6 East of Shengli Road, Longzihu District

Copyright © Anhui Ruilong Glass Machinery Co., Ltd.

 

Leave a Message

Leave a Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

home

products

company

contact